Product ID:THERMOFIT S-1009 ADHESIVE PART A
MSDS Date:01/01/1991
FSC:8040
NIIN:00-181-7201
Kit Part:Y
MSDS Number: BNRNB

RAYCHEM CORP

300 CONSTITUTION DRIVE
MENLO PARK, CA 94025
US

Emergency Phone: 415-361-4907

Info Phone: 415-361-4907

Preparer: ARLENE KLONOFF

Cage: 06090

STEVEN INDUSTRIES

8 BAYONNE, NJ 07002-3417 US

Telephone: 201-437-6501

Cage: 33150

EPICHLOROHYDRIN/BISPHENOL A EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000

AMORPHOUS SILICA *(NOT AVAIL AS PARTICULATE BOUND IN

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3*

AMINE CATALYST (N-AMINOETHYLPIPERAZINE)

CAS: 140-31-8

RTECS: TK8050000

LD50 LC50 Mixture:ORAL LD50 (RAT) = 11.4 G/KG (EPOXY)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATING TO EYES AND SKIN. LOW ORDER
OF ACUTE TOXICITY. REPEATED OR PROLONGED CONTACT MAY PRODUCE SKIN
SENSITIZATION OR OTHER ALLERGIC RESPONSES IN SUSCEPTIBLE
INDIVIDUALS.
Explanation of Carcinogenicity:PROD INGRED, PRESENT AT EQUAL TO/GREATER
THAN 0.1% OF THE PROD, ARE NOT LISTED BY OSHA/NTP OR IARC AS
SUSPECT CARCINOGEN
Effects of Overexposure:N/K ACUTE DERMAL LD50 (RABBIT) = >16 MG/KG
(POLYAMIDE RESIN)

First Aid:EYE: FLUSH WITH WATER FOR 15 MINS. SEEK MEDICAL ATTENTION.
SKIN: WASH WITH MILD SOAP AND WATER. INGEST: DO NOT INDUCE
VOMITING. IF PATIENT HAS INGESTED A SIGNIFICANT QUANTITY, CONSIDER
DILUTION WITH W ATER AND SEEK MEDICAL ATTENTION. NEVER GIVE
ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. INHAL: REMOVE TO FRESH
AIR. TREAT SYMPTOMATICALLY.

Flash Point:480F,249C
Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICAL.
Fire Fighting Procedures:TOXIC FUMES MAY BE EVOLVED IN A FIRE.
FIREFIGHTERS SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS IN
ENCLOSED AREAS.

Spill Release Procedures:DON APPROPRIATE PERSONAL PROTECTION BEFORE
RESPONDING. CONTAIN SPILL WITH INERT ABSORBENT. TAKE MEASURES TO
STOP SPILLAGE AT THE SOURCE. TRANSFER CONTAMINATED ABSORBENT INTO A
CONTAINER AND HANDLE AS HAZARDOUS WASTE.

Handling and Storage Precautions:CURING OF ADHESIVE SHOULD BE DONE IN A
WELL- VENTILATED AREA. THE CURING PROCESS IS EXOTHERMIC.
Other Precautions:PREVENT CONTACT WITH SKIN AND EYES. WASH HANDS
THOROUGHLY AFTER USE. USE ONLY WITH ADEQUATE VENTILATION.

Respiratory Protection:IF VENTILATION IS INADEQUATE TO CONTROL VAPORS,
NIOSH/MSHA-APPROVED AIR-PURIFYING RESPIRATORS ARE RECOMMENDED.
Ventilation:IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE, ENSURE
ADEQUATE VENTILATION DURING APPLICATION.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

HCC:N1
Spec Gravity:UNKNOWN (>1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS, PURPLE LIQUID WITH SLIGHT ODOR.

Stability Indicator/Materials to Avoid:YES
ACIDS, BASES OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:MAY REACT STRONGLY EXOTHERMICALLY (RELEASE
HEAT) WITH ACIDS, BASES OR STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CO/CO2/ACIDS/ALDEHYDES/HYDROGEN
SULFIDE/ OXIDES OF SULFUR/NITROGEN COMPOUNDS. PROD LIKELY TO BE
TOXIC/SHOULD NOT INHALE.

Waste Disposal Methods:MUST BE DISPOSED OF AS HAZARDOUS WASTE IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL LAWS. DUMPING INTO SEWER,
ONTO THE GROUND OR INTO ANY BODY OF WATER IS PROHIBITED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.